Bureau Veritas (Cambodia) Limited
Đơn vị chủ quản:
Bureau Veritas (Cambodia) Limited
Số VILAS:
729
Tỉnh/Thành phố:
Phnom Penh - Cambodia
Lĩnh vực:
Chemical
Mechanical
Tên phòng thí nghiệm: | Bureau Veritas (Cambodia) Limited | ||||
Laboratory: | Bureau Veritas (Cambodia) Limited | ||||
Cơ quan chủ quản: | Bureau Veritas (Cambodia) Limited | ||||
Organization: | Bureau Veritas (Cambodia) Limited | ||||
Lĩnh vực thử nghiệm: | Hóa, Cơ | ||||
Field of testing: | Chemical, Mechanical | ||||
Người quản lý/ Laboratory manager: Mr. Ramesh Babu | |||||
Người có thẩm quyền ký/ Approved signatory: | |||||
TT | Họ và tên/ Name | Phạm vi được ký/ Scope | |||
|
Ramesh Babu | Các phép thử được công nhận/Accredited tests | |||
|
Sovann Veng | Các phép thử cơ được công nhận/ Accredited mechanical tests | |||
|
Mealea Thai | ||||
|
Kong Seng | ||||
|
Sajjathnizar Atharjaman | Các phép thử Hóa được công nhận/ Accredited chemical tests | |||
|
Reasmey Meas | ||||
Số hiệu/ Code: VILAS 729 | |
Hiệu lực công nhận/ Period of Validation: 12/05/2021 | |
Địa chỉ/ Address: Bureau Veritas (Cambodia) Limited, #1186, St.371 (Sola), Sangkat Steung Meanchey , Khan Meanchey, Phnom Penh, Cambodia. | |
Địa điểm/Location: Bureau Veritas (Cambodia) Limited, #1186, St.371 (Sola), Sangkat Steung Meanchey , Khan Meanchey, Phnom Penh, Cambodia. | |
Điện thoại/ Tel: + 855 23 962 280 | Fax: + 855 23 962 272 |
E-mail: ramesh.babu@bureauveritas.com | Website: www.bureauveritas.com/cps |
TT | Tên sản phẩm, vật liệu được thử/ Materials or product tested | Tên phép thử cụ thể/ The name of specific tests | Giới hạn định lượng (nếu có)/ Phạm vi đo Limit of quantitation (if any)/range of measurement | Phương pháp thử/ Test method |
|
Textile | Determination of pH of aqueous Extract by pH meter | 1~14 | CPSD -AN-00025-MTHD (Vers 17) GB/T 7573:2009 AATCC 81: 2016 |
|
Paint, surface coating | Determination of total Lead content by ICP-OES | 10 mg/kg | 16 CFR 1303.2- 2013 CPSC-CH- E1003-09.1- 2011 CPSD-AN- 00001-MTHD (Vers 46) |
|
Metals | Determination of total Lead content by ICP-OES | 10 mg/kg | CPSD-AN-00007-MTHD(Vers 15) CPSD-AN- 00066-MTHD(Vers 26) CPSC-CH-E1001- 8.3:2012 CPSD-AN- 00185-MTHD(Vers 29) |
|
Textile, plastic, leather, | Determination of total Lead (Pb) content by ICP-OES | 10 mg/kg | CPSD-AN- 00164-MTHD(Vers 45) CPSC-CH- E1002-08.3:2012 CPSD-AN- 00196-MTHD(Vers 28) |
|
Textile products | Determination of Formaldehyde content by UV-Vis | 16 mg/kg | ISO 14184-1: 2011, JIS L1041 PART A&B : 2011 CPSD-AN-00019 (Vers 29) CPSD-AN-00054 (Vers 35) |
|
Textile products | Determination of formaldehyde by spot test (color leaching) | POSITIVE/ NEGATIVE | AATCC Test Method 94-2007 CPSD-AN-00018 (Vers 11) |
|
Leather product | Determination of Formaldehyde content by HPLC-DAD | 5 mg/kg | ISO 17226-1:2018 GB/T 19941- 2019 CPSD-AN- 00060-MTHD (Vers. 30) |
|
Plastic, textile, leather | Determination of APEO by HPLC-MS | 1 mg/kg | ISO 18254-1: 2016 CPSD-AN- 00735-MTHD (Vers 23) |
|
Determination of AP by GC-MS | 1 mg/kg | ISO 18254-1: 2016 CPSD-AN- 00735-MTHD (Vers 23) | |
|
Plastic products | Determination of total cadmium Content by ICP-OES | 10 mg/kg | EN1122:2001 Method B CPSD-AN- 00004-MTHD (Vers 23) |
|
Leather products | Determination of certain aromatic amines derived from azo colorants (Appendix 2) by GC-MD; HPLC-MS-DAD | 5 mg/kg | ISO 17234-1:2015 CPSD-AN- 00017-MTHD (Vers 34) |
|
Textile | Determination of pH of aqueous Extract by pH meter | 1 ~ 14 | ISO 3071: 2020 CPSD-AN- 00025-MTHD (Vers 17) |
|
Plastic, Leather, coating | Determination of Phthalates content (Appendix 1) by GC-MS & LCMS | 50 mg/kg | CPSC-CH- C1001-09.4 CPSD-AN-00095- MTHD (Vers 53) |
|
Textile | Determination of migration Heavy metal content (As, Ba, Cd, Cr, Hg, Pb, Sb, Se) by ICP-OES | As: 2.5 mg/kg Ba: 25 mg/kg Cd: 5 mg/kg Cr: 2.5 mg/kg Hg: 2.5mg/kg Pb: 9 mg/kg Sb: 6 mg/kg Se: 50 mg/kg | CPSD-AN- 00003-MTHD (Vers 48) |
|
Textile | Determination of the use of certain azo colorants accessible with and without extraction method (Appendix 2) by GC-MD;HPLC- MS-DAD | 5 mg/kg | EN 14362-1:2017 CPSD-AN- 00607-MTHD (Vers 31) |
|
Textiles & leather products | Determination of 4- aminoazobenzene derived from azo colorants by GC- MS/HPLC-MS-DAD method | 5 mg/kg | EN 14362-3:2017 CPSD-AN- 00107-MTHD (Vers 39) |
|
Textiles& leather products | Determination of Chlorophenols (Appendix 3) by GC-MS | 0.05 mg/kg | CPSD-AN- 00093-MTHD (Vers 17) CPSD-AN- 00094-MTHD (Vers 14) |
|
Textiles, leather products | Determination of Dimethyl fumarate by GC-MS | 0.03 mg/kg | DIN EN 17130-2019 CPSD-AN- 00647-MTHD (Vers 10) |
|
Textiles products | Determination of Carcinogenic Dyes (Appendix 4) by LC-MS method | 15 mg/kg | CPSD-AN- 00049-MTHD (Vers 27) DIN 54231:2005 |
|
Textiles products | Determination of Disperse dyes (Appendix 5) by LC-DAD-MS | 15 mg/kg | CPSD-AN- 00048-MTHD (Vers 45), DIN 54231:2005 |
|
Textiles products | Determination of Formaldehyde Release from fabric-sealed jar method by UV-VIS | 6.25 mg/kg | AATCC 112-2008 CPSD-AN- 00020-MTHD (Vers 13) |
|
Textiles products | Determination of Chloro-organic-carriers (Appendix 6) by GC-MS | 0.1 mg/kg | EN 17137:2018 CPSD-AN- 00043-MTHD (Vers 28) |
|
Textile product | Determination of Organotin Compounds (Appendix 7) by GC-MS | 0.02 mg/kg | ISO-17353: 2004 CPSD-AN- 00089-MTHD (Vers 33) |
|
Textile products | Determination of the use of certain azo colorants accessible with and without extraction method by GC-MS/HPLC-MS-DAD | 5 mg/kg | CPSD-AN- 00272-MTHD (Vers 26) GB/T 17592-2011 |
|
Plastic product | Determination of PVC – Attenuated Total Reflection / FTIR | 10 % | CPSD-AN- 00023-MTHD (Vers 7) |
TT | Tên sản phẩm, vật liệu được thử/ Materials or product tested | Tên phép thử cụ thể/ The name of specific tests | Giới hạn định lượng (nếu có)/ Phạm vi đo Limit of quantitation (if any)/range of measurement | Phương pháp thử/ Test method |
|
Garment, Fabric | Determination of mass per unit area (weight) | Up to 590 GSM | BSEN 12127: 1998 ISO 3801: 1977 ASTM D3776/ D3776M-13 |
|
Determination of fabric construction | (10~ 50) per cm | ISO 7211-2: 1984 BSEN 1049-2: 1994 ASTM D3775-12 | |
|
Determination of dimensional change in washing and drying | (-15~15) % | ISO 5077: 2007 BS EN ISO 3759:2011 BS EN ISO 6330: 2012 AATCC 135:2015 AATCC 150:2012 | |
|
Determination of water repellency. Spray Test | Grade (1~5) 0 to 100 | ISO 4920; 2012 AATCC 22:2014 | |
|
Determination of max. force and longation. Strip method | (1~ 1765.8) N | BS EN ISO 13934-1 2013 ASTM D5035-15 | |
|
Determination of max. force and elongation Grab method | (1~ 1765.8) N | BS EN ISO 13934- 2: 2014 ASTM D5034-13 | |
|
Determination of sesistance of slippage of yarn | (1~ 1765.8) N | BS EN ISO 13936-1:2004 BS EN ISO 13936-2:2004 | |
|
Determination of seam tensile properties of fabrics and made up textiles fabrics | (1~ 1765.8) N | BS EN ISO 13935-2:2014 ASTM D1683-16 | |
|
Garment, Fabric | Determination of tear strength by elmendorf tear method | (20~ 80)% of Scale value used | BS EN ISO 13937-1:2000 ASTM D1424-13 |
|
Determination of tear strength by instron method | (0.1~ 10) kg | ISO 13937-2: 2000 ASTM D2261-13 | |
|
Determination of abrasion Resistance | (100 ~50,000) cycles (+) ½ Grade | BS EN ISO 12947-1: 1999 cor 1:2002 BS EN ISO 12947-2:2016 BSEN ISO 12947-3:2002 BS EN ISO 12947-4:1999 ASTM D4966-16 | |
|
Determination of abrasion resistance of fabric flexing and abrasion method | (100 ~50,000) cycles (+) ½ Grade | ASTM D3885-19 | |
|
Determination of abrasion resistance of fabric inflated diaphragm apparatus | (100 ~50,000) cycles (+) ½ Grade | ASTM D3886-15 | |
|
Determination of pilling resistance | Grade (1~5) ±1/2 Grade | ASTM D3512/ D3512M-16 | |
|
Determination of stretch properties of woven from stretch yarns | (1~100)% | ASTM D3107-15 | |
|
Determination of stretch properties of knitted fabrics having low power | (1~100)% | ASTM D2594-04 (2016) | |
|
Determination of bursting strength | (10 ~ 1000) kPa Up to 200 psi | ASTM D3786 /D3786M-13 | |
|
Garment, Fabric | Determination of tension and elongation of elastic fabrics. Using Constant-Rate-of-Extension type tensile testing machine | (1~100)% | ASTM D4964-96: 2016 |
|
Determination of appearance of fabrics, apparels and textile products after repeated home laundering | Grade 1 to 5 ±1/2 Grade | AATCC 124: 2014 AATCC-143: 2014 | |
|
Determination of skewness change in fabric and garment twist resulting from automatic home laundering | Up to 50% | AATCC 179:2012 AATCC TS004 ISO 16322-1: 2005 ISO 16322-2: 2005 cor 1:2007 ISO 16322-3: 2005 | |
|
Determination of absorbency of textiles | Up to 60 mins | AATCC 79: 2010 | |
|
Determination of water resistance. Rain Test | (1 ~ 50) grams | AATCC 35: 2013 | |
|
Determination of fabric defects | ASTM D3990-16 | ||
|
Determination of yarn size | 10’s ~ 40’s | ASTM D1059-01 | |
|
Determination of pilling resistance and other related surface changes. Using elastomeric pad method | Grade (1 ~ 5) | ASTM D3514-16 | |
|
Determination of dimensional stability to dry cleaning | (-10 ~ 10) % | AATCC 158: 2016 | |
|
Determination of fiber analysis: qualitative and quantitative | EU Directives. 96/73/EC, 74/44/EEC ISO 1833 : 2019 (Except Part 15) AATCC 20: 2013/ 20A: 2017 | ||
|
Garment, Fabric | Determination of colour fastness to water | Grade (1 ~ 5) ±1/2 Grade | ISO 105 E01: 2013 BS EN ISO 105-E01:2013 AATCC:107:2013 |
|
Determination of colour fastness to sea water | Grade (1 ~ 5) ±1/2 Grade | ISO 105 E02: 2013 AATCC 106: 2009 | |
|
Determination of colour fastness to perspiration | Grade (1 ~ 5) ±1/2 Grade | ISO 105 E04: 2008 BS EN ISO 105-E04:2013 AATCC: 15: 2013 | |
|
Determination of colour fastness to artificial light, xenon arc fading lamp light | Grade (1 ~ 5) ±1/2 Grade | BS EN ISO 105-B02:2014 AATCC 16 -1: 2014 AATCC 16 -2: 2014 AATCC 16 -3: 2014 | |
|
Determination of colour fastness to dry clean | Grade (1 ~ 5) ±1/2 Grade | ISO 105 D01: 2010 AATCC-132:2013 | |
|
Determination of colour fastness to domestic and commercial laundering | Grade (1 ~ 5) ±1/2 Grade | ISO 105 C06: 2010 BS EN ISO105 C06:2010 AATCC 61:2013 | |
|
Determination of colour fastness to saliva | Grade (1 ~ 5) ±1/2 Grade | 35 LMBG 82.10 DIN 53160-1:2010 | |
|
Determination of colour fastness to domestic and commercial laundering (low temperature bleach activator) | Grade (1 ~ 5) ±1/2 Grade | ISO 105 CO8: 2010 ISO 105 CO9: 2001 And 2013 | |
|
Determination of colour fastness to rubbing | Grade (1 ~ 5) ±1/2 Grade | BS EN ISO 105 X12:2016 ISO 105 X16:2001 | |
|
Determination of colour fastness to crocking | Grade (1 ~ 5) ±1/2 Grade | AATCC 8: 2016 AATCC 116: 2013 | |
|
Garment, Fabric | Determination of colour fastness to dye transfer in storage | Grade (1 ~ 5) ±1/2 Grade | AATCC 163: 2013 |
|
Determination of colour fastness to non-chlorine bleach in home laundering | Grade (1 ~ 5) ±1/2 Grade | AATCC 172: 2016 | |
|
Determination of colour fastness to sodium hypochlorite in home laundering | Grade (1 ~ 5) ±1/2 Grade | AATCC 188: 2010 | |
|
Determination of colour fastness to chlorine & non chlorine bleach | Grade (1 ~ 5) ±1/2 Grade | AATCC TS001 | |
|
Determination of colour fastness to burnt gas gumes | Grade (1 ~ 5) ±1/2 Grade | AATCC 23: 2015 BS EN ISO 105 G02: 1997, Cor 1:1995, Cor 2:2009 | |
|
Determination of colour fastness to bleachinghypochlorite | Grade (1 ~ 5) ±1/2 Grade | ISO 105 N01: 1993 | |
|
Determination of assessment of the potential to phenolic yellowing of materials | Grade (1 ~ 5) ±1/2 Grade | ISO 105 X18: 2007 | |
|
Determination of colour fastness to light of textiles wetted with artificial perspiration | Grade (1 ~ 5) ±1/2 Grade | ISO 105-B07: 2009 | |
|
Determination of flammability | Class (1 ~ 3) | 16 CFR 1610 ASTM D1230-2016 | |
|
Determination of flammability resistance 45 degree angle | (1 ~ 20) seconds | CAN CGSB 4.3 No.27.5 | |
|
Determination of colour fastness to chlorinated pool water | Grade (1 ~ 5) ±1/2 Grade | AATCC 162: 2011 | |
|
Accessories on textile products (Button, snap) | Determination of tension test | (1~55) lbs. | 16 CFR 1500 51 16 CFR 1500 53 ASTM F963-16 Clause 8.9 |
|
Determination of torque test | Up to 7 kgf.cm | ASTM F963-16 Clause 8.8 | |
|
Snaps | Determination of resistance to unsnapping | (0.445 ~ 4450) N (0.1~1000) lbs | ASTM D4846-96 (2011) |
|
Trim | Determination of small parts | 16 CFR 1501: 2010 ASTM F963-16 Clause 4.6 | |
|
Determination of sharp point | 16 CFR 1500.48 ASTM F 963 - 16 Clause 4.9 | ||
|
Determination of sharp edge | 16 CFR 1500.49 ASTM F963-16 Clause 4.9 | ||
|
Zipper | Determination of strength | (0.445 ~ 4450) N (0.1 ~ 1000 lbs.) | ASTM D2061-13 BS 3084: 2006 |
|
Elastic Fabric | Determination of residual extension | Up to 5000 N | EN 14704-1: 2005 |
|
Toy | Determination of accessibility of a part or Component | EN 71-1: 2011 Clause 8.10 | |
|
Determination of sharp-edge | EN 71-1: 2011 Clause 8.11 | ||
|
Determination of sharp-point test | EN 71-1: 2011 Clause 8.12 | ||
|
Determination of small part | EN 71-1: 2011 Clause 8.20 | ||
|
Toy | Determination of torque test | Up to 7 kgf.cm | EN 71-1: 2011 Clause 8.30 |
|
Determination of tension test | Up to 70 N | EN 71-1: 2011 Clause 8.40 | |
|
Attached components on children’s clothing | Determination of attachment strength of attached components | Up to 70 N | BS 7907: 2007 Clause 6.5.1 |
|
Children’s sleepwear | Determination of flammability | Up to 10 inches | 16 CFR 1615 16 CFR 1616 |
- CPSD-...: BV developed’s method
- CFR: Code of Federal Regulations
- CPSC: Consumer Product Safety Commission AOAC: Association of Official Analytical Chemists ASTM: American Society for Testing and Materials EPA: Environmental Protection Agency
- CHPA: Consumer Healthcare Products Association BS EN: British Standard European Norm
- IEC: International Electrotechnical Commission ISO: International Standards Organization CNS: Chinese National Standards
- AS/NZS: Australian Standards/New Zealand Standards MS: Malaysian Standards
- GB: Guobiao, CNS
- PNS: Philippine National Standard SOR: Statutory Orders and Regulations EC: European Commission
- DIN: Deutsches Institut für Normung
- LFGB: Lebensmittel-, Bedarfsgegenstände- und Futtermittelgesetzbuch KS: Korean Standards
- AATCC: American Association of Textile Chemists and Colorists SASO: Saudi Arabian Standards Organization
- JIS: Japanese Industrial Standards FDA: Food and Drug Administration CARB: California Air Resources Board
- CEN/TS: Comité Européen de Normalisation /Technical specification SNV: Swiss Association for Standardization
No: | Compounce Name | CAS # |
|
dimethyl phthalate (DMP) | 131-11-3 |
|
diethyl phthalate (DEP) | 84-66-2 |
|
di-n-propyl phthalate (DPRP) | 131-16-8 |
|
diisobutyl phthalate (DiBP) | 84-69-5 |
|
dimethoxyethyl phthalate (DMEP) | 117-82-8 |
|
butyl benzyl phthalate (BBP) | 85-68-7 |
|
diisooctyl phthalate (DIOP) | 27554-26-3 |
|
di-isononyl phthalate (DINP) | 28553-12-0 and 68515-48-0 |
|
diundecyl phthalate (DUP) | 3648-20-2 |
|
di-n-butyl phthalate (DBP) | 84-74-2 |
|
di-iso-pentyl phthalate (DiPP) | 605-50-5 |
|
di-n-pentyl phthalate (DnPP) | 131-18-0 |
|
di-n-hexyl phthalate (DHP) | 84-75-3 |
|
1,2-benzenedicarboxylic acid, di-C6-8-branched alkyl esters, C7-rich (DIHP) | 71888-89-6 |
|
di(ethylhexyl) phthalate (DEHP) | 117-81-7 |
|
di-n-octyl phthalate (DnOP) | 117-84-0 |
|
di-iso-decyl phthalate (DIDP) | 26761-40-0 and 68515-49-1 |
|
butyl octyl phthalate (BOP) | 84-78-6 |
|
dicyclohexyl phthalate (DCHP) | 84-61-7 |
|
dinonyl phthalate (DNP) | 84-76-4 |
|
n-pentyl iso-pentyl phthalate (PiPP) | 776297-69-9 |
|
1,2-Benzenedicarboxylic acid, dihexyl ester, branched and linear | 68515-50-4 |
|
Diisohexyl phthalate (DIHxP) | 71850-09-4 |
|
1,2-benzenedicarboxylic acid, di-C6-10-alkyl esters; 1,2- benzenedicarboxylic acid, mixed decyl and hexyl and octyl diesters with ≥ 0.3% of dihexyl phthalate | 68515-51-5 and 68648-93-1 |
|
1,2-benzenedicarboxylic acid,dipentylester, branched and linear (DPP) | 84777-06-0 |
No: | Compounce Name | CAS # |
|
Aniline | 62-53-3 |
|
o-toluidine | 95-53-4 |
|
2,4-xylidine | 95-68-1 |
|
2,6-xylidine | 87-62-7 |
|
2-methoxyaniline | 90-04-0 |
|
p-chloroaniline | 106-47-8 |
|
p-cresidine | 120-71-8 |
|
2,4,5-trimethylaniline | 137-17-7 |
|
4-chloro-o-toluidine | 95-69-2 |
|
2,4-toluylenediamine | 95-80-7 |
|
2,4-diaminoanisole | 615-05-4 |
|
2-naphthylamine | 91-59-8 |
|
4-aminobiphenyl | 92-67-1 |
|
4,4’-oxydianiline | 101-80-4 |
|
Benzidine | 92-87-5 |
|
4,4’-diamino-diphenylmethane | 101-77-9 |
|
3,3’-dimethyl-4,4’-diamino-diphenylmethane | 838-88-0 |
|
3,3’-dimethylbenzidine | 119-93-7 |
|
4,4’-thiodianiline | 139-65-1 |
|
4,4’-methylene-bis-(2-chloroaniline) | 101-14-4 |
|
3,3’-dichlorobenzidine | 91-94-1 |
|
3,3’-dimethoxybenzidine | 119-90-4 |
|
4-aminoazobenzene (PAAB) | 60-09-3 |
No: | Compounce Name | CAS # |
|
Pentachlorophenol (PCP) | 87-86-5 |
|
o-phenylphenol (OPP) | 90-43-7 |
|
2,4,6-TCP acetate | 88-06-2 |
|
2,3,5-TCP acetate | 933-78-8 |
|
2,3,6-TrCP acetate | 933-75-5 |
|
2,4,5-TrCP acetate | 95-95-4 |
|
3,4,5-TrCP acetate | 609-19-8 |
|
2,3,4-TrCP acetate | 15950-66-0 |
|
2,3,5,6-TeCP acetate | 935-95-5 |
|
2,3,4,6-TeCP acetate | 58-90-2 |
|
2,3,4,5-TeCP acetate | 4901-51-3 |
|
2-Chlorophenol, (2-CP) | 95-57-8 |
|
3-Chlorophenol, (3-CP) | 108-43-0 |
|
4-Chlorophenol, (4-CP) | 106-48-9 |
|
2,3-Dichlorophenol, (2,3-DCP) | 576-24-9 |
|
3,4-Dichlorophenol, (3,4-DCP) | 95-77-2 |
|
3,5-Dichlorophenol, (3,5-DCP) | 591-35-5 |
|
2,6-Dichlorophenol(2,6-DCP) | 87- 65-0 |
No: | Compounce Name | CAS # |
|
Acid Red 26 | 3761-53-3 |
|
Direct Black 38 | 1937-37-7 |
|
Direct Blue 6 | 2602-46-2 |
|
Direct Red 28 | 573-58-0 |
|
Direct Brown 95 | 16071-86-6 |
|
Acid Violet 49 | C.I. 42640 |
No: | Compounce Name | CAS # |
|
Basic Green 4 | 10309-95-2 |
|
Basic violet 1 | 8004-87-3 |
|
Disperse Blue 35 | 12222-75-2 |
|
Disperse Blue 26 | 3860-63-7 |
|
Disperse Yellow 39 | 12236-29-2 |
|
Disperse Blue 124 | 61951-51-7 |
|
Disperse Blue 1 | 2475-45-8 |
|
Disperse Blue 3 | 2475-46-9 |
|
Disperse Blue 7 | 3179-90-6 |
|
Disperse Blue 102 | 69766-79-6 |
|
Disperse Blue 106 | 12223-01-7 |
|
Disperse Red 1 | 2872-52-8 |
|
Disperse Red 11 | 2872-48-2 |
|
Disperse Red 17 | 3179-89-3 |
|
Disperse Red 151 | 70210-08-1 |
|
Disperse Orange 1 | 2581-69-3 |
|
Disperse Orange 3 | 730-40-5 |
|
Disperse Orange 11 | 82-28-0 |
|
Disperse Orange 37/59/76 | 13301-61-6 |
|
Disperse Orange 149 | 85136-74-9 |
|
Disperse Yellow 1 | 119-15-3 |
|
Disperse Yellow 3 | 2832-40-8 |
|
Disperse Yellow 9 | 6373-73-5 |
|
Disperse Yellow 23 | 6250-23-3 |
|
Disperse Yellow 49 | 54824-37-2 |
|
Disperse Yellow 56 | 54077-16-6 |
|
Solvent Yellow 1 | 60-09-3 |
|
Solvent Yellow 3 | 97-56-3 |
|
Solvent Yellow 2 | 60-11-7 |
|
Disperse Brown 1 | 23355-64-8 |
|
Basic violet 3 | 548-62-9 |
|
Basic Blue 26 | 2580-56-5 |
|
Basic Red 9 | 569-61-9 |
|
Basic violet 14 | 632-99-5 |
No: | Compounce Name |
|
Chlorobenzene |
|
Dichlorobenzenes |
|
Trichlorobenzenes |
|
Tetrachlorobenzenes |
|
Pentachlorobenzene |
|
Hexachlorobenzene |
|
Chlorotoluenes |
|
Dichlorotoluenes |
|
Trichlorotoluenes |
|
Tetrachlorotoluenes |
|
Pentachlorotoluene |
No: | Compounce Name | CAS # |
|
Monobutyltin (MBT) | 1118-46-3 |
|
Dibutyltin (DBT) | 683-18-1 |
|
Tributyltin (TBT) | 1461-25-2 |
|
Tetrabutyltin (TEBT) | 1461-25-2 |
|
Monooctyltin (MOT) | 3091-25-6 |
|
Dioctyltin (DOT), | 3542-36-7 |
|
Trioctyltin (TOT) | 2587-76-0 |
|
Tripropyltin (TPT) | 2279-76-7 |
|
Triphenyltin (TPhT) | 639-58-7 |
|
Tricyclohexyltin (TCyT) | 3091-32-5 |
|
Methyltin(MeT) | 993-16-8 |
|
Dimethyltin(DMeT) | 753-73-1 |
|
Dipropyltin (DProT) | 867-36-7 |
|
Diphenyltin (DPhT) | 1135-99-5 |
|
Trimethyltin (TMeT) | 1066-45-1 |
|
Phenyltin (PhT), | 1124-19-2 |
|
Triethyltin chloride | 994-31-0 |
Ngày hiệu lực:
12/05/2024
Địa điểm công nhận:
Bureau Veritas (Cambodia) Limited, #1186, St.371 (Sola), Sangkat Steung Meanchey , Khan Meanchey, Phnom Penh, Cambodia
Số thứ tự tổ chức:
729